====== X2200 M2 (quad opteron) ======
===== LM-Sensors =====
modprobe ipmi_devintf ipmi_si ipmi_msghandler
ipmitool -I open sdr
===== Quick Reference =====
**Note - Case Sensitive**
set /SP/AgentInfo DhcpConfigured=disabled
set /SP/AgentInfo IpAddress=xxx.xxx.xxx.xxx
set /SP/AgentInfo Gateway=xxx.xxx.xxx.xxx
set /SP/SystemInfo/CtrlInfo BootCtrl=BIOSSetup
set /SP/SystemInfo/CtrlInfo PowerCtrl=reset
set /SP/SystemInfo/CtrlInfo PowerCtrl=gracefuloff
set /SP/SystemInfo/CtrlInfo PowerCtrl=forceoff
set /SP/SystemInfo/CtrlInfo PowerCtrl=on
set /SP/AgentInfo/console/speed=115200
start /SP/AgentInfo/console
To revert to CLI once the console has been started, press Esc-Shift-9 ''Esc ('' keys.
**Note - After running the start command, no output will be displayed until the server is rebooted.**
===== Detailni navod jak na iLOM =====
Co je treba udelat na strane debiana/ubuntu:
- vyradit parametry kernelu quiet a splash
- pridat parametry **console=tty0 console=ttyS1,115200n8**
- spustit getty na portu ttyS1 (pro fanousky solarisu -- ttyb)
Na Debianu pridat do ''/etc/inittab'' radku ''T0:23:respawn:/sbin/getty -L ttyS1 115200 vt100''
Na Ubuntu pridat do ''/etc/event.d/ttyS1'' cely soubor
# ttyS1 - getty
#
# This service maintains a getty on ttyS0 from the point the system is
# started until it is shut down again.
start on runlevel 2
start on runlevel 3
start on runlevel 4
start on runlevel 5
stop on runlevel 0
stop on runlevel 1
stop on runlevel 6
respawn
exec /sbin/getty 115200 ttyS1
Na konzoli se prihlasime pres ssh na standardnim portu 22. Napiseme prikaz
''start /SP/AgentInfo/console'' a meli bysme obdrzet vystup podobny:
Ubuntu 8.04 archiv ttyS1
archiv login:
Pokud vam spadne pripojeni, konzole zustane aktivni. Bud se vam povede relogin, nebo ji muzete vypnout ''stop /SP/AgentInfo/console'' a znovu nahodit.
===== Links =====
* [[http://docs.sun.com/source/819-6588-13/cli_com.html#0_pgfId-1008648]]
* [[http://docs.sun.com/source/819-6601-20/index.html]]
* {{:servery:sun-x2100.pdf|}}