[Show page]
[Old revisions]
[[unknown link type]]
[
]

Differences

This shows you the differences between two versions of the page.

--- hardware:cisco [2009/06/11 18:46]
admin
+++ hardware:cisco [2014/09/08 17:00]
kotrlik [ssh + telnet + scp]
@@ Line 1: / Line 1: @@
+===== Best practice =====
+<code>
+enable
+show int fa0/11
+config ter
+int fa0/11
+flowcontrol receive on
+</code>
+<code>
+show mac-address-table
+ip name-server 88.86.116.45
+</code>
+=== setting up snmp ===
+<code>
+cisco1a(config)#snmp-server community public
+cisco1a(config)#snmp-server enable traps vtp
+cisco1a(config)#exit
+cisco1a#wr
+</code>
+Measuring with mrtg guide [[linux:prutok]]
+=== setting up telnet ===
+<code>
+ line vty 0 15
+ password top-secret-password
+ login
+</code>
+=== setting up bond ===
+<code>
+telnet 10.0.2.1
+enable
+config term
+int gig0/1
+no spanning-tree bpdufilter enable
+no spanning-tree bpduguard enable
+spanning-tree guard root
+exit
+int gig0/2
+no spanning-tree bpdufilter enable
+no spanning-tree bpduguard enable
+spanning-tree guard root
+exit
+</code>
+============ ssh + telnet + scp ====================
+Aby fungovali vsechny najednou, musi se v prubehu konfigurace (ktere se po netu vali tisice) nastavit veledulezite
+line vty 0 4
+  transport input ssh telnet
+  transport output ssh telnet
+  flowcontrol out
+=========== Cisco Backup ============
+To backup the running config on a cisco switch to a TFTP server
+  #copy running-config tftp:
+To make a backup of the VLAN.dat file
+  #copy flash:vlan.dat tftp:
+===== Links =====
+  * http://www.cisco.com/en/US/products/ps6406/prod_models_comparison.html
+  * http://d.scribd.com/ScribdViewer.swf?document_id=2934234&amp;access_key=key-2axczrmtmkb4fovvumq8&amp;version=1&amp;viewMode=
+  * http://bayupw.blogspot.com/2008/01/configuring-cisco-catalyst-switch.html

hardware/cisco.txt · Last modified: 2014/09/08 17:00 by kotrlik