Cisco Best Practice

or What we really use!

• vlans (802.11q)
• stp
• snmp → mrtg
• security - dhcp helper
• more static arp

Something's missing, something's redundant?

• missing - broken cable, lost connection, broken switch
• redundant - badly placed cable, circles the network

STP can fix all of the above.

Redundant layer 2 redundacy problems

• broadcast storm
• multiple frame copies - which is basicly the same
• ARP table instabilities (Cisco: CAM table)

Magic question - what is 32768?

Time tracking

• 20 waiting for no BPDU
• 15 unblock blocked ports and listening state for new BPDUs - topology change
• 15 learning state, accepts all ethernet frames, learns MAC, but doesn't forward

First we obviously need to know, how to disable stp for end host device (designated forwarding port).

conf t
int fa 0/5
    spanning-tree portfast
end

We make switch A root for VLAN 10

spanning-tree mode pvst
spanning-tree vlan 10 priority 16384

And switch B root for VLAN 20

spanning-tree mode pvst
spanning-tree vlan 20 priority 16384

See what happens:

Yes, it is. New version Rapid STP doesn't have blocking port, rather has alternate port. Theory goes on the table, practicaly you doesn't have to know anything. Just type

spanning-tree mode rapid-pvst

show spanning-tree vlan 98

Let's suppose you're running an office network with STP. What if someone sent bad BPDU frames to you switches? He could re-route all the traffic throught his black-hat-notebook

There is no more or less static arp, but the interval could be longer.