• Log In 
• Recent Changes 
•  

• [Show pagesource]
• [Old revisions]
• [[unknown link type]]
• [
  ]

This is an old revision of the document!

Note: Fibre channel - cheap stuff!!!

Requirements

• Two disks (preferably same size and my lovely LVM)
• Networking between machines (node1 & node2), Tip: VMPlayer LAN Segments
• Working DNS resolution (/etc/hosts file)
• Selinux disabled
• Iptables ports (7788) allowed
• and lot of patience

Install ELRepo repository on your both system:

rpm -Uvh http://www.elrepo.org/elrepo-release-6-6.el6.elrepo.noarch.rpm

Update both repo:

yum update -y

Install DRBD:

[root@node1 ~]# yum -y install drbd84-utils kmod-drbd84
[root@node2 ~]# yum -y install drbd84-utils kmod-drbd84

Insert drbd module manually on both machines or reboot:

/sbin/modprobe drbd

Partition DRBD on both machines (the ugly way):

[root@node1 ~]# fdisk -cu /dev/sdb
[root@node2 ~]# fdisk -cu /dev/sdb

and the right way:

[root@node1 ~]# lvcreate -L 4GB -n mail_disk vg_jahoda
[root@node2 ~]# lvcreate -L 4GB -n mail_disk vg_boruvka

resource mail_disk {
 startup {
	 wfc-timeout 30;
	 outdated-wfc-timeout 20;
	 degr-wfc-timeout 30;
 }
 
net {
	 cram-hmac-alg sha1;
	 shared-secret sync_disk;
 }
 
syncer {
	 rate 100M;
	 al-extents 257;
	 on-no-data-accessible io-error;
 }
 
on node1 {
	 device /dev/drbd0;
	 disk /dev/jahoda/mail;
	 address 10.1.1.1:7788;
	 flexible-meta-disk internal;
 }
 
on node2 {
	 device /dev/drbd0;
	 disk /dev/boruvka/mail;
	 address 10.1.1.2:7788;
	 meta-disk internal;
 }
}

Initialize devices (very similar to pvcreate or mkfs.ext4):

[root@node1 ~]# drbdadm create-dm mail_disk
[root@node2 ~]# drbdadm create-dm mail_disk

It is time to start the services. And be careful Jimm, you have 30 seconds to start both.

[root@node1 ~]# service drbd restart
[root@node2 ~]# /etc/init.d/drbd restart

Check cat /proc/drbd, we should be both Secondary/Secondary and data Inconsistent/Inconsistent. The rest is garbage for geeks.

version: 8.4.5 (api:1/proto:86-101)
GIT-hash: 1d360bde0e095d495786eaeb2a1ac76888e4db96 build by phil@Build64R6, 2014-10-28 10:32:53
 0: cs:Connected ro:Secondary/Secondary ds:Diskless/Inconsistent C r-----
    ns:0 nr:0 dw:0 dr:0 al:0 bm:0 lo:0 pe:0 ua:0 ap:0 ep:1 wo:b oos:0

Careful reader could have notices we are having Diskless/Inconsistent. Initialize (create-dm) the disk again or zero it (dd if=/dev/zero) and initialize again and thing should be fine.

[root@node1 ~]# drbdadm -- --overwrite-data-of-peer primary repdata