[Show page]
[Old revisions]
[[unknown link type]]
[
]

Differences

This shows you the differences between two versions of the page.

--- linux:multipath [2016/09/02 11:02]
vondra
+++ linux:multipath [2017/03/13 17:24] (current)
tomsa [Manual failover]
@@ Line 7: / Line 7: @@
   * blacklistuje vsechna zarizeni mimo tech s wwid uvedenym v blacklist exceptions
   * multipathy uvadime v sekci multipaths, aby dostali hezke jmeno :)
-<code>
+<code json>
 blacklist {
         wwid .*
@@ Line 40: / Line 40: @@
 2317936357870636c
 </code>
-  * pridame ho do konfigurace do sekce blacklist_exceptions:<code>
+  * pridame ho do konfigurace do sekce blacklist_exceptions (oddelovac je |):<code>wwid "26261353635663533|2317936357870636c"</code>
+  * dale do sekce multipaths pridame jeho zaznam:<code>
+multipath {
+        wwid              2317936357870636c
+        alias             mach3
+}
+</code>
+  * nacteme konfiguraci:<code>
+multipath -v2
+create: mach3 (2317936357870636c) undef SCST_FIO,raid-disk
+size=9.1T features='0' hwhandler='0' wp=undef
+|-+- policy='service-time 0' prio=1 status=undef
+| `- 1:0:2:1  sdh  8:112  undef ready running
+`-+- policy='service-time 0' prio=1 status=undef
+  `- 15:0:0:1 sdj  8:144  undef ready running
+</code>
+  * overime, ze multipath funguje:<code>
+multipath -ll
+backup (26261353635663533) dm-0 SCST_FIO,raid-disk
+size=11T features='0' hwhandler='0' wp=rw
+|-+- policy='service-time 0' prio=1 status=active
+| `- 1:0:1:1  sddf 70:208 active ready running
+`-+- policy='service-time 0' prio=1 status=enabled
+  `- 14:0:0:1 sdm  8:192  active ready running
+mach3 (2317936357870636c) dm-80 SCST_FIO,raid-disk
+size=9.1T features='0' hwhandler='0' wp=rw
+|-+- policy='service-time 0' prio=1 status=active
+| `- 1:0:2:1  sdh  8:112  active ready running
+`-+- policy='service-time 0' prio=1 status=enabled
+  `- 15:0:0:1 sdj  8:144  active ready running</code>
+  * vzniklo nam zarizeni /dev/mapper/mach3, ktere pouzivame stejne jako jakekoli jine blokove zarizeni
+====Manual failover====
+) vyradit jednu z cest
+<code bash>
+echo offline > /sys/block/ [device name] /device/state
+</code>
+) cestu vratit zpet
+<code bash>
+echo running > /sys/block/ [device name] /device/state
+</code>
+Je to vhodne udelat po automatickem failover v pripade, ze se prepne cesta z fc na iscsi. Je nastaveno nevracet se zpet, takze zabitim aktivniho ISCSI donutime multipath zase zacit pouzivat FC

linux/multipath.1472806931.txt.gz · Last modified: 2016/09/02 11:02 by vondra